PC wave tile use range

Roof/wall of agricultural greenhouses, gardens, and greenhouses;

· Stations, docks, airports, shelters, roofs;

· Roofing/wall lighting of factory buildings, warehouses, and households;

· Roofing/wall lighting of commercial buildings; etc.

Precautions for storage, transportation and use of PC wave tiles:

· It is forbidden to contact the surface of the unused cement and the surface of acid and alkaline substances.

· It is forbidden to contact with organic solvents and glues and paints composed of them.

· The frame should be clean and the surface of the groove should be flat. The dust and dirt on the surface of the PC board are generally wiped with a soft cloth or a sponge dampened with a neutral detergent, and then thoroughly rinsed with water.

• Select the correct sheet thickness and allowable radius of curvature.

• Install the fixing screws before drilling, and the hole diameter is 1.5 times the diameter of the screw. Too tight a screw can cause stress.

· Reserve space and pay attention to the embedded depth. Expansion value = linear expansion coefficient × length × maximum temperature change value (linear expansion coefficient of PC board 7 × 10 -5 mm / mm / ° C)