How Should The PC Endurance Board Be Installed To Avoid Cracking?

PC endurance board is a new type of decoration material. Compared with some traditional plates, endurance boards have more advantages, such as good flame retardancy, strong impact resistance and so on. Its use greatly facilitates people's daily life and work. And these are based on the correct installation of the endurance board. When some people install, the endurance board is prone to deformation and cracking, which brings a lot of troubles to the future use. So, how should I install to avoid this happening? The following endurance board manufacturers will briefly introduce to you:

   First, we must first guide the hole before we can fix it. Moreover, its aperture must be greater than six to nine millimeters, which can prevent the phenomenon of heat expansion and contraction in the future.

   Second, in the longitudinal overlap with the steel plate, the endurance board must have a stack of two hundred millimeters between it, and must be placed with two waterstops.

   Third, when the Shanghai PC endurance board is fixed, it is necessary to use a super-fine water-washing gasket to make it between the screw and the endurance board, so as to be waterproof and dustproof.

   4. Remember to lock the flooding washer into the screw, and then use the electric drill to lock it into the stringer and fix it thoroughly.

  5. When installing the endurance board, place a non-slip form in its lateral position, and the foot can be stepped on it to play a fixed role, which can avoid the deformation and cracking of the endurance board.